Fuel Tank Bulkhead Connector Assembly, 6-Way Weld-In, Aluminum

BUNG-BCAPX28WAL, Bulkhead Wiring Assembly, 6-Conductor, Weld-In 6061-T6 Aluminum

• 6-Conductor Bulkhead Connector, 30 Amps per terminal (max ICS)
• 6061-T6 Aluminum weld-in bung
• Viton™/FKM seals, Gas & E85 compatible
• Installs on any flat surface with a 2" hole
• Vapor and liquid proof
• Plug & Play 6-position atmosphere and vapor-side connectors available

The BUNG-BCAPX28WAL makes it easy to install up to six individual electrical circuits into your fuel tank. The 6-conductor bulkhead connector can handle up to 30 amps (ICS) which is enough to support the latest high-flow in-tank pumps. The 6061-T6 aluminum bung can be TIG welded on top of an aluminum fuel tank, fuel cell, surge tank, etc. The bung requires a 2" (51mm) hole.

The 6-conductor APEX 2.8 bulkhead connector must be removed with a pair of c-clip pliers prior to welding in the bung to prevent heat damage. A flat circular area of 65mm (2.6") is recommended for the installation area.

PARTS INCLUDED:

• 1 x 6-conductor APEX 2.8 bulkhead connector
• 1 x Viton™/FKM o-ring
• 1 x Retaining ring (c-clip)
• 1 x Weld-in bung - 6061-T6 Aluminum
• 1 x Silicon grease packet

Mating connector sets are required for the atmosphere and vapor-side connections listed under add-ons below.