66 lb/hr Disc Low-Z Fuel Injector
Item #: 01D130x
$57.30
per EACH
In Stock & Ready to Ship
01D130x - 66 lb/hr Low-Impedance Import Fuel Injector
These are factory new injectors. We do not offer reconditioned / used injectors.
FEATURES:- Low-impedance coil works with peak / hold injector drivers.
- Injectors sold in packs are dynamically flow-matched to within 1% tolerance.
- Injectors sold as each are as per factory tolerance specified.
- High-speed disc action allows wider dynamic flow range for improved idling and quieter operation
- Design resists build up deposits which can affect fuel flow and cause clogging
- No fuel leakage for quicker starts
- Longer service life
- O-ring lubricant supplied
SPECIFICATIONS:
- Static flow: 66.1 lb/hr (500 grams/min)
- Dynamic flow: 14.63 mg/pulse
- Coil resistance: 2.2 Ohms
- Spray pattern: Cone
- Connector type: Minitimer (EV1-style)
- Dynamic tollerance: +/-6%
- Time offset: ms
- Linear PW (min): ms
- SMOV: v
All tests run with n-Heptane @ 20°C (+/-1°C), 3.0 Bar (+/-0.01 Bar), 14VDC (+/-0.05VDC), saturated driver with resistive / capacitive or 70V zener cutoff. Dynamic rate @ 2.5ms @ 10ms period (100Hz)
Injector flow rates are based on testing with n-Heptane test solvent (0.6855 g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in most common injector designs at about a 3 to 4% higher rate than n-Heptane. A ratio of 1.035:1 can be used when converting the flow specifications above.
* Advanced tuning data available in our support forum for confirmed Racetronix customers only.
