55 lb/hr Disc High-Z Fuel Injector
$49.40
per EACH01D069x - 52 lb/hr High-Impedance Import Fuel Injector
FEATURES:
- High-impedance coil works with all factory ECM/PCM injector drivers.
- Injectors sold in packs are dynamically flow-matched to within 1% tolerance.
- Injectors sold as each are as per factory tolerance specified.
- High-speed disc action allows wider dynamic flow range for improved idling and quieter operation
- Design resists build up deposits which can affect fuel flow and cause clogging
- No fuel leakage for quicker starts
- Longer service life
- O-ring lubricant supplied
SPECIFICATIONS:
- Static flow: 54.9 lb/hr (415.3 grams/min)
- Dynamic flow: 12.33 mg/pulse
- Coil resistance: 12.2 Ohms
- Spray pattern: Cone
- Connector type: Minitimer (EV1-style)
- Dynamic tollerance: +/-4%
- Time offset: 0.72ms
- Linear PW (min): 1.3ms
- SMOV: 3.54v
All
tests run with n-Heptane @ 20°C (+/-1°C), 3.0 Bar (+/-0.01 Bar), 14VDC
(+/-0.05VDC), saturated driver with resistive / capacitive or 70V zener cutoff. Dynamic rate @ 2.5ms @ 10ms period (100Hz)
Injector flow rates are based on testing with n-Heptane test solvent (0.6855
g/ml). U.S. EPA emission test gasoline 40CFR86.113 (0.735g/ml) flows in
most common injector designs at about a 3 to 4% higher rate than n-Heptane.
A ratio of 1.035:1 can be used when converting the flow specifications
above.
These are factory new injectors. We do not offer reconditioned / used injectors.
* Advanced tuning data available in our support forum for confirmed Racetronix customers only.
