4T 24" O2 Sensor Extension
Item #: O2EXT-4T-24
$25.00
per EACH
In Stock & Ready to Ship
O2EXT-4T-24 - Trapezoid 4-Position 24" REGULAR
- Fully Plug and Play with the factory harness and sensors
- Crosslinked automotive wire (Packard spec. M-2023, -49ºF to 257ºF, 2 x 16 AWG heater wires, 2 x 18 AWG sensor wires)
- High-grade Nylon loom / conduit (GM spec. GMP.PA6.003, -40ºF to 300ºF)
- Connector locks
- One-piece terminal and loom lock (on applicable models)
- Heat shrunk loom ends (on applicable models)
Racetronix
oxygen sensor extensions allow for easy relocation of oxygen sensors. This
is perfect for the installation of headers which require the oxygen sensor
be moved further downstream.
APPLICATIONS:
- C5 LS2 Corvette - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (B2S1) Right Front
- C5 LS2 Corvette -Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (B1S1) Left Front
- C6 LS3/LS7 Corvette - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (B2S1) Right Front
- C6 LS3/LS7 Corvette -Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (B1S1) Left Front
- Camaro LS3/L99/LTT (V6) - Heated Oxygen Sensor (HO2S) Bank 2 Sensor 1 (B2S1) Right Front (LTT = L/F)
- Camaro LS3/L99/LTT (V6) - Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 (B1S1) Left Front (LTT = R/F)
CONNECTOR DIAGRAM:
TERMINAL DESIGNATIONS:
| Terminal | Function |
|---|---|
| A | HO2S Low Signal |
| B | HO2S High Signal |
| C | Not used |
| D | Ignition Voltage |
| E | HO2S Heater Low Control |
